Solar system health checks in Bundaberg
Is your solar system actually doing its job? Our in-house qualified electrician checks your panels, mounting, cabling and inverter, measures how the system is performing, and gives you a clear photo report — ideally done straight after your clean.
A proper look over your whole system — not just the glass.
Most solar systems are installed and then forgotten. A health check catches small problems before they turn into lost generation, damage or a bigger repair bill.
Panels & frames
Cracked glass, hot spots you can see, discolouration, frame damage, lichen and soiling.
Mounting & roof fixings
Clamps, rails and mounting points — loose, corroded or missing parts.
Cabling & connectors
Visible DC cabling, connectors and conduit — UV damage, rubbing, sagging or chewed cables.
Isolators & inverter
Isolators, signage and inverter status — error codes, faults and what the display is telling you.
Output readings
Where safe and accessible, string current and voltage readings compared with what we’d expect for the sunlight on the day.
Birds & shading
Nesting under panels, droppings, new shading from trees — and whether bird proofing is worth it.
Photos of everything
Before-and-after, defect and inverter photos so you can see exactly what we saw on the roof.
Clear recommendations
Plain-English notes: what’s fine, what to keep an eye on, and anything that needs attention.
Know your system is healthy — and that you’re getting what you paid for.
A dirty or faulty system can quietly under-produce for years without you noticing. Pairing a health check with a clean means we measure your system at its best and spot anything that’s holding it back.
- Lower-than-usual generation
- Bills creeping up
- Inverter error lights or messages
- Storm or hail through the area
- Birds nesting under the panels
- Never checked since install
Simple, and done while we’re already on the roof
Ask in your quote
Tick “Solar health check” on the quote form, or just tell Will when you call.
Clean, then check
We clean your panels first, then check the system and take readings with the panels clean.
Get your report
You get photos and notes on what we found, plus any recommendations — no jargon.
Solar health check questions
What is a solar system health check?
A visual, non-invasive check of your solar system by our in-house qualified electrician. We look over your panels, mounting, visible cabling, isolators and inverter, and where it’s safe and accessible we take string readings to compare what your system is producing against what we’d expect for the conditions on the day.
Is it an electrical compliance inspection?
No. A health check is a visual, non-invasive check — it isn’t a formal compliance inspection or certificate. We don’t disconnect, alter or repair anything as part of it. If we find something that needs electrical work, we’ll show you the photos and explain your options.
Can I get a health check with my solar clean?
Yes — that’s the best time to do it. We’re already on the roof, and checking output after the panels are clean gives a much fairer picture of how the system is going. Just ask for it when you request your quote.
How do I know if my system needs checking?
Common signs are lower-than-usual generation or bills creeping up, inverter error lights or messages, visible damage, birds nesting under the panels, or a system that’s never been looked at since it was installed.
Do you check commercial systems too?
Yes. We check systems on homes, farms, schools, aged care, factories and warehouses, and can include a health check as part of a commercial clean or maintenance visit.
Running a larger system?
Schools, aged care, factories, warehouses and farms — we can include health checks as part of a commercial clean or maintenance visit.
Get your solar clean and health check booked.
Get a fast, free quote — we’ll get back to you with a price within the day. Open 6am–6pm.